How to Set the Clicker Channel

In order to avoid conflicts with nearby receivers in use, Clickers and Clicker receivers (on the instructor’s computer) have the ability to operate on one of 80 channels.
If your clicker is not set to the same channel as the instructors receiver you will need to change the channel that your Clicker is running on.

1. When the instructor opens up TurningPoint Anywhere you will see the LaunchPad on their screen. The channel the receiver is on will be displayed in green.

2. Press the Channel button.

3. Enter the channel number shown on the LaunchPad.

4. Press the enter key.

5. The channel is changed.